BRPYQ - LUBRIKO M-32 GREASE
- MSDS: BRPYQ
- Manufacturer: MASTER LUBRICANTS COMPANY
- Product Name: LUBRIKO M-32 GREASE
- National Stock Number: 9150-00N043051
Product Identification
Product ID:LUBRIKO M-32 GREASE
MSDS Date:12/21/1992
FSC:9150
NIIN:00N043051
MSDS Number: BRPYQ
Responsible Party
US
Emergency Phone: 609-848-2880
Info Phone: 609-848-2880
Cage: 76227
Contractor
Telephone: 215-389-2680
Cage: 76227
Ingredients
SODIUM TALLOWATE
CAS: 8052-48-0
Fraction By Weight: 24-26%
OSHA PEL N/K
ACGIH TLV: 10 MG/M3 (MFR)
68309-87-5)
CAS: 64755-01-7
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: 10 MG/M3 (MFR)
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 24-25%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
SOLVENT REFINED HYDROTREATED RESIDUAL OIL; (MINERAL OIL)
CAS: 64742-57-0
Fraction By Weight: 24-25%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
SOLVENT DEWAXED RESIDUAL OIL (PETROLEUM); (MINERAL OIL)
CAS: 64742-62-7
Fraction By Weight: 24-25%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN OR EYE
CONTACT MAY CAUSE MILD (TRANSIENT) IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:ADMINISTER VOLUMES OF WATER OR MILK & GET MEDICAL
ATTENTION. SKIN:WIPE OFF & WASH W/SOAP & WATER. EYES:FLUSH W/
COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINS & GET MEDICAL
ATTENTION. INHAL:REMO VE FROM EXPOSURE TO FRESH AIR.
Fire Fighting
Flash Point Method:COC
Flash Point:400F,204C
Extinguishing Media:DRY CHEMICAL, FOAM, WATER FOG OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ABSORB IN SAND OR INERT MATERIAL, SCOOP OR
SWEEP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE INDOORS W/LIDS IN PLACE & AWAY
FROM OPEN FLAME OR DIRECT SUNLIGHT.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED. USE ONLY NIOSH/MSHA
APPROVED EQUIPMENT.
Ventilation:NORMALLY NOT REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:FOLLOW NORMAL CLEANLINESS PROCEDURES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Melt/Freeze Pt:M.P/F.P Text:365F,185C
Vapor Pres:<0.01 @20C
Vapor Density:>10
Spec Gravity:0.9 (H2O=1)
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:SEMI-SOLID; BLAND ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDENTS & LARGE VOLUME OF WATER OR MOISTURE.
Stability Condition to Avoid:OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE IN CASES OF INCOMPLETE
COMBUSTION.
Disposal
Waste Disposal Methods:CONSULT FEDERAL, STATE OR LOCAL AUTHORITIES FOR
PROPER DISPOSAL PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.